5 Select “Memory” using the 4(UP)/$(DOWN) buttons and press the EXECUTE button.
You can now change the “Memory” setting.
6 Select either “off” or “on” using the 4(UP)/ $(DOWN) buttons and press the EXECUTE button.
offSerial numbers are attached as file names on each card. When this method is selected, specifying a starting number is not possible.
on
Serial numbers are attached as file names and continue in consecutive order even if a new card is inserted. When this method is selected, you can specify a starting number.
Note
File names cannot be duplicated. When a card is inserted and pictures are recorded on that card, file names are attached starting with the next number from the number of the last recorded picture.
The LCD monitor display returns to the keyword screen.
7 Choose “Start No.” using the 4(UP)/$(DOWN) buttons and press the EXECUTE button.
You can now input a starting number.
8 Specify a starting number using the 4(UP)/ $(DOWN) buttons and press the EXECUTE button.
Note
•You can specify a number within the range of
•You cannot take any more pictures after file names have reached 99999. Insert a new card and specify a starting number other than 99999.
Settings Operations Advanced
continued on next page 73 GB