Taking

10

•OFF •CAM

•PLAY

MENU

EXCUTE

EXIT

10 Turning the power/mode dial to OFF turns the power off.

Note

If you do not operate the camera for about one minute when the camera is on in the CAM mode, the LCD monitor automatically shuts off (Standby Mode).

Also, if the camera is not touched for approximately four minutes after that, the camera automatically shuts completely off.

Picture a

Auto Focus

This camera employs an auto focus mechanism. When auto focus is turned on, the camera automatically focuses on the picture subject. Auto focus is turned on by setting the focus mode switch to AF. Centering the LCD monitor or the center of the finder on the subject and pressing the release button halfway focuses the picture frame.

When the picture is in focus, the AF focusing mark in the LCD monitor and viewfinder changes as follows. Check the mark and listen for the beep (this setting can be turnded off) before making the exposure, and if the picture is not in focus, let go of the release button and press it halfway again to refocus.

• On the LCD monitor

When the release button is pressed halfway, the AF focusing mark flashes green.

• In the viewfinder

When the release button is pressed halfway, the AF focusing mark flashes.

2000 5.6

36 GB

When the picture is focused, the indicator lights a steady green. If the picture cannot be focused, the indicator lights a steady red.

When the picture is focused, the indicator lights steadily.

2000 5.6

When the picture cannot be focused, the indicator continues flashing.

2000 5.6