Picture a Taking Operations Advanced

4 Press the EXECUTE button.

The WB FLASH menu is displayed.

5 Select “Flash Mode” using the 4(UP)/$(DOWN) buttons and press the EXECUTE button.

WB FLASH

 

 

Flash Mode

 

Internal

/External

Interval

10 sec(3~10)

Start

 

 

 

 

 

 

You can now set the flash mode.

6 Choose “Internal” (built-in flash) or “External” (external flash) using the 4(UP)/$(DOWN) buttons and press the EXECUTE button.

Choose “Internal” to use the built-in flash or “External” to use the external flash and press the EXECUTE button.

7 If you chose “External” in step 6, select “Interval” using the 4(UP)/$(DOWN) buttons and press the EXECUTE button.

You can choose the interval during which to have the flash light.

Set an interval within the range of 3 to 10 seconds (in one-second units) using the 4(UP)/$(DOWN) buttons and press the EXECUTE button.

Note

When using an external flash, set the amount of light for the flash before adjusting the white balance to avoid extreme brightness or darkness in your pictures.

8 Point the camera toward a completely white subject until it completely fills the viewfinder.

82 GB