Inserting the “Memory Stick”
Access lamp
“Memory Stick”
1Open the “Memory Stick” cover.
Open the cover while sliding it in the direction of the arrow.
2Insert the “Memory Stick.”
Insert the “Memory Stick” with the B mark facing toward the “Memory Stick” compartment as illustrated.
3Close the “Memory Stick” cover.
Removing the “Memory Stick”
Open the “Memory Stick” cover, then press the “Memory Stick” eject button.
Notes
•Insert the “Memory Stick” firmly, otherwise a message such as “MEMORY STICK ERROR” will be displayed.
•Never remove the “Memory Stick” or turn off the power while the access lamp is lit up.
•You cannot record or edit images on a “Memory Stick” if the erasure prevention switch is set to the LOCK position.
Connector
Erasure prevention switch
OC
Label space
12