“USB Mode Mass Storage” appears on the screen of the camera.

USB Mode

Mass Storage

Access indicators*

Memory Stick

Switch on MENU

When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera.

Wait for a while.

*During communication, the access indicators turn red. Do not operate the computer until the indicators turn white.

•If “USB Mode Mass Storage” does not appear, set [USB Connect] to [Mass Storage] (page 58).

•Do not remove the camera from the Cyber-shot Station while using the USB connection. Your image files may get damaged. When disconnecting the USB connection, see “To delete the USB connection” on page 67.

Stage 3-A: Copying images to a computer

•For Windows 98/98SE/2000/Me, follow the procedure explained in “Stage 3-B: Copying images to a Computer” on page 65.

•For Windows XP, when the wizard screen does not appear automatically, follow the procedure explained in “Stage 3-B: Copying images to a Computer” on page 65.

This section describes an example of copying images to a “My Documents” folder.

1 After making a USB connection in Stage 2, click [Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard] t [OK] as the wizard screen appears automatically on the desktop.

1

2

The “Scanner and Camera Wizard” screen appears.

2 Click [Next].

The images saved on the “Memory Stick Duo” of the camera appear.

3 Click the check box of unwanted images to remove the checkmark so they are not copied, then click [Next].

1

2

The “Picture Name and Destination” screen appears.

64