Battery pack and power

You cannot charge the battery pack.

•The camera is turned on. Turn the camera off (t step 2 in “Read This First”).

The battery pack cannot be installed.

•Install the battery pack correctly (t step 1 in “Read This First”).

The /CHG lamp flashes when charging a battery pack.

•Install the battery pack correctly (t step 1 in “Read This First”).

•The battery pack is discharged. Re-insert the AC Adaptor and then charge the battery pack.

•The battery pack has malfunctioned. Consult your Sony dealer or local authorized Sony service facility.

The /CHG lamp does not light up when charging a battery pack.

•The AC Adaptor is disconnected. Properly connect the AC Adaptor (page 16, t step 1 in “Read This First”).

•Install the battery pack correctly (t step 1 in “Read This First”).

•The battery pack is completely charged.

•The battery pack is discharged. Re-insert the AC Adaptor and then charge the battery pack.

•The AC Adaptor has malfunctioned. Consult your Sony dealer or local authorized Sony service facility.

•Properly attach the camera to the Cyber-shot Station (page 17).

The battery remaining indicator is incorrect, or sufficient battery remaining indicator is displayed but the power runs out too quickly.

•This phenomenon occurs when you use the camera in an extremely hot or cold location (page 99).

•The displayed time remaining differs from the current one. Fully discharge and then charge the battery pack to correct the display.

•The battery pack is discharged. Install the charged battery pack (t step 1 in “Read This First”).

•The battery pack is dead (page 99). Replace it with new one.

The battery pack runs down too quickly.

•Charge it sufficiently (t step 1 in “Read This First”).

•You are using the camera in an extremely cold location (page 99).

•The battery terminal is dirty. Clean the battery terminal with a cotton swab, etc., and charge the battery pack.

•The battery pack is dead (page 99). Replace it with new one.

84