Connecting your camera to your TV

Viewing images on a TV screen

You can view images on a TV screen by connecting the camera to a TV.

Turn off both your camera and the TV before connecting the camera and the TV.

1 Connect the supplied A/V connecting cable to the A/V OUT (STEREO) jack of the Cyber-shot Station and the video/audio input jacks of the TV.

2To audio/video input jacks

3 Turn on the TV and set the TV/ video input switch to “VIDEO”.

For details, see the operational instructions supplied with TV.

4 Set the mode to PLAY with MODE.

 

101 8/9

 

VGA

 

PHOTO

101-0008

2005 1 1 10:30PM

MOVIE

BACK/NEXT

VOLUME

MODE

 

 

1To the A/V OUT (STEREO) jack

If your TV has a mono input jack, connect the yellow plug of A/V connecting cable to the video input jack, then connect either the white plug or the red audio plug to the audio input jack. If connected to the white plug, you will hear sound from the left audio output, and if connected to the red plug, you will hear sound from the right audio output.

When the USB cable is connected to the Cyber-shot Station, disconnect the USB cable from the Cyber-shot Station.

2 Attach the camera on the Cyber- shot Station (page 17).

The recorded images will appear on the screen.

Select the desired image with b/B on the control button.

When you attach the camera on the Cyber- shot Station while connecting to the A/V connecting cable, nothing will appear on the LCD screen of the camera.

When using your camera abroad, it may be necessary to switch the video signal output to match that of your TV system (page 59).

TV your to camera your Connecting

81