Connecting the camera to your computer

aInsert the “Memory Stick” with the images you want to copy into the camera, then close the battery/“Memory Stick” cover.

bOpen the DC IN jack cover, and connect the AC Adaptor (supplied), then plug the adaptor into a wall outlet (wall socket).

2 To a wall outlet (wall socket)

1

AC Adaptor

•When you copy images to your computer using the battery pack, copying may be failed or cause data corruption by battery shutoff. We recommend that you use the AC Adaptor.

cSet the mode dial to . Turn on your computer and the

camera.

•You can also carry out this operation when the mode dial is set to SET UP.

dConnect the supplied cable for multi-use terminal (USB) to the multi connector of the camera.

•Place the camera with the LCD screen facing upwards.

eConnect the cable for multi- use terminal (USB) to your computer.

•When you use a desktop computer, we recommend that you connect the cable for multi-use terminal (USB) to the USB connector on the rear panel.

•When using Windows XP, the AutoPlay wizard automatically appears on the desktop. Proceed to page 85.

USB Mode

Normal

Access indicators*

Switch on MENU

“USB Mode Normal” appears on the LCD screen of the camera. When a USB connection is established for the first time, your computer automatically runs the used program to recognize the camera. Wait for a while.

*During communication, the access indicators turn red. Do not operate the computer until the indicators turn white.

•If “USB Mode Normal” does not appear in step 5, press MENU, select [USB Connect], and

set it to [Normal].

computer your on images Enjoying

83