zRegistering the priority face (Selected-face Memory)
Normally the camera automatically selects the face to focus on according to the [Face Detection] setting, but you can also select and register a face to be given priority.
Face Priority Frame Off
1Press z on the control button during Face Detection. The leftmost face is registered as
the priority face, and the frame changes from | to an orange frame ( ). |
2Each time you press z, the priority face moves one face to the right. Press z repeatedly until the orange frame (
) is on the face you want to register.
3To cancel the face registration (Off), move the orange frame to the rightmost face, then press z again.
•When you remove the battery from the camera, the face registration is reset.
•When the registered face disappears from the LCD screen, the camera returns to the setting selected by [Face Detection]. When the registered face is shown on the LCD screen again, the camera focuses on the registered face.
•It may not be possible to detect the registered face correctly depending on the surrounding brightness, the subject’s hairstyle, etc. In this case, register the face again under the conditions where the image will be shot.
•When the Smile Shutter function is used with the Face Detection frame registered, Smile Detection is performed only on the registered face.
•In Easy Shooting mode, the priority face cannot be registered.
zMaking faces easier to detect
•Use an appropriate lighting level.
•Make sure the subjects’ faces are not hidden by hats, masks,
sunglasses, etc.
• Make sure the subjects are facing the camera.