Protect
Protects recorded images against accidental erasure.
The mark is displayed for registered images.
1Press the (Playback) button to switch to playback mode.
2MENU t (Protect) t desired mode t z on the control button
(This Image) Protects the currently displayed image in
(Multiple | You can select and protect multiple images. |
Images) | Do as the following after step 2. |
1Select an image then press z.
Repeat the above steps until there are no more images to be protected. Select an image with a mark to release the mark.
2MENU t [OK] t z
zTo cancel the protection
Select the image for which you want to cancel protection, and unlock it by pressing z on the control button as the same procedure to protect it.
The indicator disappears, and the protection is released.