Copying images to your computer using the “Picture Motion Browser”

Preparing the camera and the computer1 Insert a “Memory Stick Duo” with recorded images into the camera.

•When copying images in the internal memory, this step is unnecessary.

2 Insert the sufficiently charged battery pack into the camera, or connect the camera to a wall outlet (wall socket) with the AC Adaptor (not supplied) and the USB/AV/DC IN cable for multi-use terminal (not supplied).

•When you copy images to your computer using a battery pack with little remaining charge, copying may fail or image data may become corrupted if the battery pack shuts down too soon.

Connecting the camera to your computer

2To the multi connector

1 To a USB jack

Cable for multi-use terminal

3 Turn on the computer, then press the (Playback) button.

(Playback) button

“Connecting...” appears on the screen of the camera.

Access indicators*

When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera.

Wait for a while.

* is displayed on the screen during the communication session.

Do not operate the computer while the indicator is displayed. When the indicator changes to

, you can start using the computer again.

•If “Mass Storage” does not appear, set [USB Connect] to [Mass Storage] (page 87).

computer your Using

103