6Attach the eyecup block to the viewfinder, pushing it straight on until it clicks.
bNotes
•The eyecup block is a precision part. Do not disassemble it further.
•Do not touch the lens of the eyecup block.
•If you turn the viewfinder lens adjustment lever after removing the eyecup block from your camcorder, the lever and lens may come out the eyecup block. If this happens, replace them as follows:
1Attach the lever to the eyecup block in the position illustrated. Do not turn the lever before fitting the lens in place.
2Place the lens in the eyecup block so that the three projections fit into the respective grooves.
3Turn the lever in the direction of the arrow to insert the lens fully into the eyecup block.
On charging the
Your camcorder has a
However, even if the
xProcedures
Connect your camcorder to a wall outlet using the supplied AC Adaptor, and leave it with the POWER switch set to OFF (CHG) for more than 24 hours.
Information Additional
107