You can select the maximum zoom level in case you want to zoom greater than optical zoom magnification (p. 36). Note that the image quality decreases when you use the digital zoom.
You can compensate for camera shake (the default setting is [ON]). Set [STEADYSHOT] to [OFF] (
) when using a tripod (optional), then the image becomes natural.
The right side of the bar shows the digital zooming factor. The zooming zone appears when you select the zooming level.
For
BOFF
Up to 40 ⋅ zoom is performed optically.
80×
Up to 40 ⋅ zoom is performed optically, and after that up to 80 ⋅ zoom is performed digitally.
2000×
Up to 40 ⋅ zoom is performed optically, and after that, up to 2,000 ⋅ zoom is performed digitally.
For
BOFF
Up to 25 ⋅ zoom is performed optically.
50×
Up to 25 ⋅ zoom is performed optically, and after that up to 50 ⋅ zoom is performed digitally.
2000×
Up to 25 ⋅ zoom is performed optically, and after that, up to 2,000 ⋅ zoom is performed digitally.
AUTO SLW SHUTTR (Auto slow shutter)
When this is set to [ON] (the default setting), the shutter speed is automatically reduced to 1/30 second when recording in dark conditions.
REMAININGBAUTO
Displays the remaining disc indicator for about 8 seconds in situations such as those described below.
–When your camcorder recognizes the
remaining disc capacity with the POWER
switch set to 
(Movie).
–When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch set to 
(Movie).
–When you select the movie recording mode on the HOME MENU.
ON
Always displays the remaining disc indicator.
bNotes
•When the remaining recordable time for movies is less than 5 minutes, the indicator stays on the screen.
Select [ON] (the default setting) to display the recording date and time when you play back a disc on a device with a subtitle display function. Also refer to the instruction manual of the playback device.
camcorder your Customizing
65