Warning indicators and messages (Continued)

Z Need to unfinalize disc.

To record on the finalized DVD-RW (VIDEO mode), unfinalize it (p. 60).

Disc error. Remove disc.

Your camcorder cannot recognize the disc, because the disc is incompatible or has scratches.

Z Disc error. Unsupported format.

The disc recorded in the different format code from your camcorder. Formatting the disc may enable you to use the disc on your camcorder (DVD- RW/DVD+RW only) (p.59).

x “Memory Stick Duo”

Reinsert the Memory Stick.

Reinsert the “Memory Stick Duo” a few times. If even then the indicator flashes, the “Memory Stick Duo” could be damaged. Try with another “Memory Stick Duo.”

This Memory Stick is not formatted correctly.

Check the format, then format the "Memory Stick Duo" with your camcorder if necessary (p. 60, 101).

Memory Stick folders are full.

You cannot create folders exceeding 999MSDCF. You cannot create or delete created folders using your camcorder.

xPictBridge compliant printer

Not connected to PictBridge compatible printer.

Switch off the printer and switch it on again, then disconnect the USB cable and reconnect it.

Cannot print. Check the printer.

Switch off the printer and switch it on again, then disconnect the USB cable and reconnect it.

x Others

No further selection is possible.

You can select up to 100 images only when:

deleting images

editing the playlist

printing still images

Data protected.

The disc has been protected with another device.

Cannot divide.

You cannot divided a movie that is extremely short.

Recovering data Avoid any vibration.

Your camcorder tries to recover data automatically if the data writing was not performed properly.

You will have to format the “Memory Stick Duo” (p. 60), or delete them using your computer.

Cannot recover data on disc.

Writing data to the disc has failed. Attempts were made to recover the data, but they were unsuccessful.

96