Step 2: Charging the battery pack
2 |
| POWER switch | ||
| 1 |
| ||
|
|
| ||
|
| 3 |
| |
|
| DC IN jack |
| |
| Jack cover | 4 |
| |
Battery | DC plug | CHG | ||
| ||||
|
|
| (charge) | |
| 4 |
| lamp | |
AC Adaptor | Power cord |
| ||
|
|
| ||
|
| To the wall outlet |
| |
You can charge the “InfoLITHIUM” | 4 Connect the power cord to the AC | |||
battery pack (H series) (p. 103) after | ||||
attaching it to your camcorder. | Adaptor and the wall outlet. | |||
Notes |
| The CHG (charge) lamp lights up and | ||
| charging starts. The CHG (charge) lamp | |||
• You can use only "InfoLITHIUM" battery pack | ||||
turns off when the battery is fully | ||||
H series. |
| charged. |
| |
1 Turn the POWER switch in the | 5 Disconnect the AC Adaptor from | |||
direction of the arrow to OFF | ||||
the DC IN jack on your |
| |||
(CHG) (The default setting). |
| |||
camcorder. |
| |||
|
|
| ||
2 Attach the battery pack by sliding |
|
| ||
it in the direction of the arrow | Notes |
| ||
until it clicks. |
| • Disconnect the AC Adaptor from the DC IN | ||
|
| jack holding both the camcorder and the DC | ||
|
| plug. |
|
3 Connect the AC Adaptor to the DC IN jack of your camcorder.
Open the jack cover, and connect the DC plug of the AC Adaptor.
Match the v mark on the DC plug with the v mark on your camcorder.
Turn the POWER switch to OFF(CHG). Slide the BATT (battery) release lever and remove the battery pack.
22