Notes

•You cannot enjoy a picture with an S video signal if your TV does not conform to the S video signal. When your TV does not have an S VIDEO input, connect the component via the LINE OUT VIDEO connector using the video connecting cord (not supplied) instead of the S video cord. For details, see page 8.

Refer to the instructions supplied with your TV.

•Refer to the instructions supplied with the component to be connected.

•You cannot make digital audio recordings of discs recorded in multichannel surround format directly using an MD deck or DAT deck.

•If you select one of the TVS settings (page 35) while playing a DVD, the player does not output the following signals from the DIGITAL OUT (COAXIAL and OPTICAL) jacks.

–Dolby Digital signals (when you set “DOLBY DIGITAL” in “AUDIO SETUP” to “D-PCM”)

–MPEG audio signals

Setups for the player

Some setup adjustments are necessary for the player depending on the components to be connected.

If you run Quick Setup (page 14), you can make the minimum number of basic adjustments to the player.

When you connect a receiver (amplifier) which has a digital connector and lacks a built-in DTS, Dolby Digital or MPEG audio decoder, or a digital component such as a DAT or MD deck

The “AUDIO SETUP” (page 65) items in the setup display must be set as shown in the illustration below.

These are the default settings and do not need to be adjusted when you first connect the player.

Refer to page 56 for displaying the “AUDIO SETUP” menu.

 

AUDIO SETUP

 

 

 

 

AUDIO ATT:

OFF

 

 

 

AUDIO DRC:

STANDARD

 

 

 

DOWNMIX:

DOLBY SURROUND

 

 

 

DIGITAL OUT:

ON

 

 

 

DOLBY DIGITAL:

D-PCM

Set the

 

 

MPEG:

 

PCM

items as

 

 

DTS:

 

OFF

 

 

 

shown

 

 

 

 

 

 

 

 

 

 

To set, press

, then ENTER .

 

To quit, press

DISPLAY .

 

 

Started Getting

11