10 Press M/m to select the item.
Set “DOLBY DIGITAL” to “DOLBY DIGITAL” only when you connect an AV receiver (amplifier) having a Dolby Digital decoder to the DIGITAL OUT OPTICAL or COAXIAL connector.
|
| AUDIO SETUP |
|
|
| ||
|
|
| AUDIO ATT: |
|
| OFF | |
|
|
| AUDIO DRC: |
| STANDARD | ||
|
|
| DOWNMIX: | DOLBY SURROUND | |||
|
|
| DIGITAL OUT: |
|
| ON | |
|
|
| DOLBY DIGITAL: |
|
| ||
|
|
| MPEG: |
|
|
| |
|
|
| DTS: |
|
| DOLBY DIGITAL | |
|
|
|
|
|
|
|
|
| To set, press | , then ENTER . | |||||
| To quit, press | DISPLAY . |
|
|
| ||
11 Press ENTER. |
|
|
| ||||
DTS is selected. |
|
|
| ||||
|
|
|
|
|
| ||
|
| AUDIO SETUP |
|
|
| ||
|
|
| AUDIO ATT: |
|
| OFF | |
|
|
| AUDIO DRC: |
| STANDARD | ||
|
|
| DOWNMIX: | DOLBY SURROUND | |||
|
|
| DIGITAL OUT: |
|
| ON | |
|
|
| DOLBY DIGITAL: |
|
| ||
|
|
| MPEG: |
|
|
| PCM |
|
|
| DTS: |
|
|
| OFF |
|
|
|
|
|
|
| OFF |
|
|
|
|
|
|
| ON |
|
|
|
|
|
|
|
|
| To set, press | , then | ENTER . | ||||
| To quit, press | DISPLAY . |
|
|
|
12 Press M/m to select the item.
Set “ON” only when you connect an AV receiver (amplifier) having a DTS decoder to the DIGITAL OUT OPTICAL or COAXIAL connector.
13 Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
If your AV receiver (amplifier) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 66) in the setup display (page 56).
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, press DISPLAY on the remote or player when the player is in stop mode, and select “QUICK” under “SETUP” in the Control Menu (page 56).
Enjoying the surround sound effects
To enjoy the surround sound effects of this player or your receiver (amplifier), the following items must be set as described below. Each of these are the default settings and do not need to be adjusted when you first connect the player.
You will find the following setup items in the setup display (page 56), not in the Quick Setup.
Select “AUDIO SETUP” in the setup display, then set the required items as follows.
If you connect no receiver (amplifier) (page 8)
No additional settings are needed.
If you connect a receiver (amplifier) without a
Set “DOWNMIX” to “DOLBY SURROUND.”
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON.”
If you connect a receiver (amplifier) without a
After setting “DIGITAL OUT ” to “ON,” set “DOLBY DIGITAL” to
Started Getting
15