Additional Information
Troubleshooting
If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem. Should any problem persist, consult your nearest Sony dealer.
Power
The power is not turned on.
,Check that the mains lead is connected securely.
Picture
There is no picture.
,Check that the player is connected securely.
,The video connecting cord is damaged. Replace it with a new one.
,Make sure you connect the player to the video input connector on the TV. (page 8)
,Make sure you turn on the TV.
,Make sure you select the video input on the TV so that you can view the pictures from the player.
Picture noise appears.
,Clean the disc.
,If the video signal from your player has to go through your VCR to get to your TV, the copy- protection applied to some DVD programs could affect picture quality. If you still experience problems after checking your connections, please try connecting your player directly to your TV’s S video input, if your TV is equipped with this input. (page 8)
,If the color system of your player does not match with that of your TV, change the color system of the player. For details, see page 9. (You cannot change the color system of the DVD disc itself.)
Even though you set the aspect ratio in “TV TYPE” in “SCREEN SETUP” of the setup display, the picture does not fill the screen.
,The aspect ratio is fixed on your DVD.
Information Additional
67