If you connect the player to a monitor or projector having component video input connectors that conform to output signals from the COMPONENT VIDEO OUT (Y, CB, CR) connectors on the player
Connect the component via the COMPONENT VIDEO OUT connectors using three video connecting cords (not supplied) of the same kind. You will get a better picture.
Monitor or projector
CD/DVD playerwith component video input connectors
COMPONENT
VIDEO OUTCOMPONENT
VIDEO IN
YY
CBCB
CRCR
Notes
•Refer to the instructions supplied with the component to be connected.
•Do not connect this player to a video deck. If you do, noise may appear in the picture.
VCRTV
CD/DVDConnect
playerdirectly
Setting the color system to your TV
The player’s color system must be set depending on the TV to be connected.
•If the color system of the TV is NTSC or DUAL
Since the color system of the player is set to NTSC, you can use the player as it is.
•If the color system of the TV is PAL
To change the color system of the player to PAL, hold POWER down while pressing X on the player. The power indicator lights up in green and changes to red. Then release X.
zYou can check the color system of the player
Press POWER on the player and then press @/1 on the remote. The power indicator lights up in green. When “NTSC” appears on the front panel display, the color system of the player is set to NTSC. When “NTSC” does not appear, the color system is set to PAL.
Started Getting
9