AIf you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will enjoy standard quality images.
Yellow (Video) | Yellow (Video) |
White (L) | White (L) |
Red (R) | Red (R) |
Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are connecting to a TV only.)
BIf you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
CIf you are connecting to a monitor, projector, or AV amplifier (receiver) having component video input jacks (Y, PB, PR)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high quality images. If your TV accepts progressive (480p) format signals, you must use this connection and then press PROGRESSIVE on the front panel to accept progressive video signals. See “Using the PROGRESSIVE button” on the next page for more information.
Green | Green |
Blue | Blue |
Red | Red |
When connecting to a wide screen TV
Depending on the disc, the image of some discs may not fit your TV screen. If you want to change the aspect ratio, please refer to page 72.
Notes
•Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen.
VCR
CD/DVD player |
| TV |
|
Connect directly
•Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it is recommended that you switch the connection to the standard definition output. If there are questions regarding your Sony TV set’s compatibility with this model DVD player, please contact our customer service center.
18