By adjusting the remote signal, you can control your TV with the supplied remote. If you connect the player to an AV amplifier (receiver), you can control the volume with the supplied remote.
[/1 | Turns the TV on or off |
|
|
VOL +/– | Adjusts the volume of the TV |
|
|
TV/VIDEO | Switches the TV’s input |
| source between the TV and |
| other input sources |
| The button works even if the |
| TV/DVD switch is set to |
| DVD |
|
|
Number buttons | Selects the channel of the TV |
and ENTER |
|
|
|
Notes
•Depending on the connected unit, you may not be able to correctly control your TV or AV amplifier (receiver) using some of the buttons below.
•If you enter a new code number, the code number previously entered will be erased.
•When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.
Controlling TVs with the remoteTV/DVD | [/1 | |
switch | ||
| ||
Number | VOL +/– | |
| ||
buttons | TV/VIDEO | |
| ENTER |
1 Slide the TV/DVD switch to TV.
2 Hold down [/1, and enter your TV’s manufacturer code (see “Code numbers of controllable TV’s” below) using the number buttons.
3 Release [/1.
When the TV/DVD switch is set to TV, the remote performs the following:
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
Manufacturer | Code number |
Sony | 01 (default) |
|
|
Akai | 04 |
|
|
AOC | 04 |
|
|
Centurion | 12 |
|
|
Coronado | 03 |
|
|
12 | |
|
|
Daytron | 12 |
|
|
Emerson | 03, 04, 14 |
|
|
Fisher | 11 |
|
|
General Electric | 06, 10 |
|
|
Gold Star | 03, 04, 17 |
|
|
Hitachi | 02, 03 |
|
|
J.C.Penney | 04, 12 |
|
|
JVC | 09 |
|
|
KMC | 03 |
|
|
Magnavox | 03, 08, 12 |
|
|
Marantz | 04, 13 |
|
|
MGA/Mitsubishi | 04, 12, 13, 17 |
|
|
NEC | 04, 12 |
|
|
Panasonic | 06, 19 |
|
|
Philco | 03, 04 |
|
|
Philips | 08, 21 |
|
|
Pioneer | 16 |
68