12Press X/x to select the type of
DTS signal sent to your amplifier (receiver).
Choose the item that matches the audio connection you selected on pages 22 to 24 ( B through D ).
•
•DTS (only if the amplifier (receiver) has a DTS decoder) (page 76)
13Press ENTER.
◆When “DIGITAL OUTPUT” is selected in step 9
• Quick Setup is finished and
connections are complete.
◆When “DIGITAL & 5.1CH OUTPUT” is selected in step 9
• The Setup Display for “SPEAKER SETUP” appears.
14Press X/x to select the size of the center speaker.
If no center speaker is connected, select “NONE” (page 77).
SPEAKER SETUP (DVD)
SIZE:
DISTANCE: |
|
|
| |
LEVEL(FRONT): |
|
|
| |
LEVEL(REAR): | OFF | |||
TEST TONE: | ||||
| FRONT: |
| LARGE | |
| CENTER: |
| LARGE | |
REAR:LARGE
SUBWOOFER:SMALL
NONE
15Press ENTER.
“REAR” is selected.
SPEAKER SETUP (DVD)
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):
TEST TONE: | OFF |
FRONT: | LARGE |
CENTER: | LARGE |
REAR:LARGE(REAR)
SUBWOOFER: LARGE(REAR)
LARGE(SIDE)
16Press X/x to select the size of the rear speakers.
If no rear speaker is connected, select “NONE.”
“SIDE” and “REAR” refer to the speaker position relative to your listening position (page 77).
17Press ENTER.
“SUBWOOFER” is selected.
| SPEAKER SETUP (DVD) | ||||||||
|
| SIZE: |
|
|
|
|
|
| |
|
| DISTANCE: |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
|
| LEVEL(FRONT): |
|
|
|
|
|
| |
|
| LEVEL(REAR): |
| OFF | |||||
|
| TEST TONE: |
| ||||||
|
|
| FRONT: |
|
|
|
| LARGE | |
|
|
| CENTER: |
|
|
|
| LARGE | |
|
|
| REAR: |
|
| LARGE(REAR) | |||
|
|
| SUBWOOFER: |
|
|
|
| YES | |
|
|
|
|
|
|
|
|
|
|
To set, press | , then ENTER . |
| YES | ||||||
| NONE | ||||||||
|
|
|
|
|
|
|
|
|
|
18Press X/x to select whether or not you have connected a subwoofer.
19Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Enjoying the surround sound effectsTo enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 22 to 24 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. Refer to page 70 for using the Setup Display.
Audio Connection (pages 21 to 24)
A
• No additional settings are needed.
•Set “DOWNMIX” to “DOLBY SURROUND” (page 75).
•Set “DOWNMIX” to “DOLBY SURROUND” (page 75).
•Set “DIGITAL OUT” to “ON” (page 75).
28