D-1

•Set “DISTANCE,” “LEVEL (FRONT),” and “LEVEL (REAR)” according to the connected speakers (page 78).

zHints

• For connections B-1C-1D-1

If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 75).

• For connections B-2C-2D-2

Set “48kHz/96kHz PCM” to “96kHZ/24bit” only if you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 76).

•The speaker size you set in steps 14 through 18 will also adjust the Super Audio CD speaker size of “SPEAKER SETUP.” If you want to change the speaker size for Super Audio CDs, you can set it in “SPEAKER SETUP” (page 77).

Hookups

29