Sony DVP-NC80V Slide the TV/DVD switch to DVD, VOL +/- buttons control the AV amplifier’s volume

Controlling the volume of your AV amplifier (receiver) with the remote

TV/DVD switch

	[/1
Number	VOL +/–
buttons

1 Slide the TV/DVD switch to DVD.

2 Hold down [/1, and enter the manufacturer code (see the table below) for your AV amplifier (receiver) using the number buttons.

3 Release [/1.

The VOL +/– buttons control the AV amplifier’s volume.

◆If you want to control the TV’s volume

Slide the TV/DVD switch to TV.

Code numbers of controllable AV amplifiers (receivers)

If more than one code number is listed, try entering them one at a time until you find the one that works with your AV amplifier (receiver).

Manufacturer	Code number
Sony	78, 79, 80, 91
Denon	84, 85, 86
Kenwood	92, 93
Onkyo	81, 82, 83
Pioneer	99
Sansui	87
Technics	97, 98
Yamaha	94, 95, 96

zHint

If you want to control the TV’s volume even when the TV/DVD switch is set to DVD, repeat steps 1 and 2 and enter the code number 90 (default).

64