AIf you are connecting to a SCART (EURO AV) input jack
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to be connected.
Also, when you set “LINE” to “S VIDEO” or “RGB” under “CUSTOM SETUP” in the Setup Display (page 59), use a SCART (EURO AV) cord that conforms to each signal.
BIf you are connecting to a video input jack
Connect the yellow plugs of the audio/video cord (supplied) to the yellow (video) jacks. You will enjoy standard quality images.
Yellow (Video) | Yellow (Video) |
White (L) | White (L) |
Red (R) | Red (R) |
Use the red and white plugs to connect to the audio input jacks (page 19).
CIf you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
Notes
•Do not connect your player to a VCR. You may not receive a clear image on the TV screen if you pass the player signals via the VCR.
VCR
CD/DVD player |
|
| TV |
Connect directly
•When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set to the player automatically when you start playback or press any button except for POWER on the player or [/1 on the remote. If you wish to watch TV, press TV/DVD on the remote to return the input to the TV.
When you play a disc recorded in the NTSC colour system, the player outputs the video signal or the setup display, etc., in the NTSC colour system and the picture may not appear on PAL colour system televisions. In this case, open the tray and remove the disc.
18