DConnecting an AV amplifier (receiver) with a digital input jack having a Dolby Digital, MPEG audio, or DTS decoder, and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function of your AV amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver)
•Dolby Digital (5.1ch) (page 67)
•DTS (5.1ch) (page 67)
•MPEG audio (5.1ch) (page 67)
zTo enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct speaker setting location.
Note
After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” (page 26). If your AV amplifier (receiver) has a DTS decoder, set “DTS” to “ON” (page 26). If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 62). Otherwise, no sound or a loud noise will come from the speakers.
24