Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. The surround effects you will enjoy depend on the connections and components you use.

Select a connection

Select one of the following connections, A through D .

Connection

Components to be connected

 

 

A (page 20)

• TV (stereo)

B(page 21) • Stereo amplifier (receiver)

(having L and R audio input jacks only, or having a digital input jack)

•2 speakers (front L and R)

B(page 21) • MD deck/DAT deck

C(page 22) • AV amplifier (receiver) with a Dolby* Surround (Pro Logic) decoder (having L and R audio input jacks only, or having a digital input jack)

•3 speakers

(front L and R, and rear (monaural))

•6 speakers

(front L and R, centre, rear L and R, and subwoofer)

D(page 24) • AV amplifier (receiver) having a Dolby Digital, MPEG audio, or DTS** decoder, and a digital input jack

•6 speakers

(front L and R, rear L and R, centre, and subwoofer)

*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights reserved.

**“DTS” is a registered trademark of Digital Theater Systems, Inc.

Hookups

continued

19