Step 3: Connecting to your TV
Connect this player to your TV monitor, or projector using an audio/video (SCART) cord. This connection will use your TV speakers for sound.
INPUT
TV
Hookups
SCART cord
(not supplied)
to LINE
L C E N T E R
COAXIAL
DIGITAL OUT
l : Signal flow
CD/DVD player
When connecting to a SCART input jack
Connect a SCART cord (not supplied). Be sure to make the connections firmly to avoid hum and noise.
• Surround effect (page 39)
TV: Dynamic Theatre, Dynamic, Wide, Night
When using this connection, check that the TV conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP” in the Setup Display (page 61), use a SCART cord that conforms to each signal.
,continued 15