RAD Data comm ASMI-450 operation manual Configuration Error Messages

ASMi-450 Control from the Control Port

4.7 Configuration Error Messages

The ASMi-450 provides configuration error messages for the control terminal user. The configuration messages have the format ERROR, followed by a two- digit code. The ASMi-450 will display a short description of the error message after the ERROR code.

The error messages are explained below.

ERROR 01	ILLEGAL	LOOP COMBINATION
	Illegal combination of loopbacks: you are trying to activate simultaneously
	local and remote loopbacks. Only one loopback can be connected at a time.
ERROR 02	REM REM	LOOP WHILE SYNC LOSS
	You are trying to activate REM REM loopback while synchronization is lost.
ERROR 03	ILLEGAL	CLOCK MODE ON REMOTE SIDE
	You are trying to select the internal clock mode at the remote side.
ERROR 04	LOOP IS	NOT ACTIVE
	You are trying to disconnect a loopback that is not active.
ERROR 06	ILLEGAL	NODE NUMBER
	You are trying to select a node number greater than 255.

ASMi-450 Installation and Operation Manual 4-29