RAD Data comm ASMI-450 operation manual Remote Reverse

Diagnostics

Table 5-1. ASMi-450 Alarm Buffer Messages (Cont’d)

Message	Description		Corrective Actions	Alarm
				Type
REMOTE REVERSE	Reversed loop polarity has been	The ASMi-450 continues normal		ON
POLARITY	detected by the remote ASMi-450	operation
REMOTE SELF TEST	A problem has been detected during	Repeat self-test, and replace the		ON
ERROR	remote ASMi-450 self-test	ASMi-450 if it fails the self-test
REMOTE SIGNAL	Loss of HDSL line input signal at the	1.	Check the HDSL line.	ON/OFF
LOSS	remote ASMi-450.	2.	Perform self-test on the two
			ASMi-450 and replace the
			ASMi-450 that fails the self-test
REMOTE SP-PAR	Section DEF SP of switch S1 of the	If it is no longer necessary to enforce		ON
SWITCH IS ON	remote ASMi-450 is set ON	the default SP-PAR and node
		number, change setting to OFF
REMOTE SYNC LOSS	Loss of synchronization on the	1.	Check the HDSL line	ON/OFF
	HDSL line at the remote ASMi-450	2.	Perform self-test on the two
			ASMi-450 and replace the
			ASMi-450 that fails the self-test

ASMi-450 Installation and Operation Manual 5-5