RAD Data comm ASMI-450 operation manual DEF Node, Def Pwd

ASMi-450 Control from the Control Port

2. The ASMi-450 displays the node name entry form:

ENTER NODE NAME (MAX 8 CHARACTERS) =

CURRENT NODE NAME = 'name'

where 'name' is the node name the ASMi-450 is currently assigned.

3.Type the desired name, and then press <CR>. The ASMi-450 will display the TIME and DATE fields, followed by the ASMi-450 prompt.

Note

Before entering a node name, make sure that the PSWD section of the ASMi-450 internal switch S1 is not set to ON, because in such a case the default name (blank) is enforced.

DEF NODE ------------------------------------------------------------------------------------

Purpose	Define the node number, or address, of the ASMi-450. The allowed range is 0 to 255.
Format	DEF NODE
Use	1.	To define the ASMi-450 node number, type:
		DEF NODE<CR>
	2.	The ASMi-450 displays the node entry form:
		NODE (0 to 255) = 0
	3.	Type the desired number in the range of 0 to 255, and then press <CR>. The
		ASMi-450 will display the TIME and DATE fields, followed by the ASMi-450
		prompt.

Note

Before entering a node number, make sure that the PSWD section of the ASMi-450 internal switch S1 is not set to ON, because in such a case the default number (0) is enforced.

DEF PWD--------------------------------------------------------------------------------------

Purpose	Define a new user password for the ASMi-450. The password must have 4 to 8
	characters.
Format	DEF PWD
Use	1. Type
	DEF PWD<CR>

4-12 ASMi-450 Installation and Operation Manual