RAD Data comm ASMI-450 operation manual Configuration Procedure, Step Action Use the Command

Quick-Start Guide

2. Configuration Procedure

You are ready to start ASMi-450 configuration. After typing a command, press <CR> to see the data entry form:

∙Use the space bar to move the cursor to the desired field.

∙Use the F key to scroll forward, and the B key to scroll backward among the available values. For free text fields, type the desired text.

∙When ready, press <CR> to display the next data entry page of the current command. Pressing<CR> after the last data entry, executes the command.

∙You can exit without executing the changes by pressing CTRL-C at any time before pressing <CR>.

To obtain correct display of data forms on your terminal, you must select the terminal control sequences:

1.Type the command F.

2.In each field, type the code corresponding to your terminal type. The chart below lists the codes for common terminal types:

Function			Terminal Type
	TV920	VT52	VT100	Freedom 100/110	Freedom 220
Clear Screen	1B2A0000	N/A	1B5B324A	1B2A0000	1B5B324A
Cursor Home	1E000000	1B480000	1B5B4800	1E000000	1B5B4800
Cursor Right	0C000000	1B430000	1B5B3143	0C000000	1B5B0143

3. When done, press <CR>.

Configure the ASMi-450 in the following order:

Step	Action	Use the Command
1	Set ASMi-450 system time	TIME
2	Set ASMi-450 system date	DATE
3	Define control port characteristics	DEF SP
4	Define system characteristics	DEF SYS
5	Define general system parameters	DEF AGENT
		DEF NAME
		DEF NODE
		DEF PWD

Quick-Start Guide - 2 ASMi-450 Installation and Operation Manual