AIf you are connecting to a SCART (EURO AV) input jack
Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP” in the Setup Display (page 76), use a SCART (EURO AV) cord that conforms to each signal.
If you are connecting to a VCR
Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from your TV.
BIf you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will enjoy standard quality images.
Yellow (Video) | Yellow (Video) |
White (L) | White (L) |
Red (R) | Red (R) |
Use the red and white plugs to connect to the audio input jacks (page 24). (Do this if you are connecting to a TV only.)
CIf you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
Notes
•Do not connect a VCR, etc. between your TV and the player. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the player to this jack.
VCR
CD/DVD player |
| TV |
|
Connect directly
•When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set to the player automatically when you start playback or press any button except for \/1. In this case, press TV/DVD on the remote to return the input to the TV.
When you play a disc recorded in the NTSC colour system, the player outputs the video signal or the Setup Display etc. in the NTSC colour system and the picture may not appear on the PAL colour system televisions. In this case, open the tray and remove the disc.
20