Playing Discs

Playing Discs

Depending on the DVD or VIDEO CD, some operations may be different or restricted.

Refer to the operating instructions supplied with your disc.

Power indicator

A

[/1H

Z [/1

◆When using an amplifier (receiver)

Turn on the amplifier (receiver) and select the appropriate channel so that you can hear sound from the player.

4 Press Aon the player, and place a disc on the disc tray.

Discs Playing

With the playback side facing down

5 Press H.

The disc tray closes, and the player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver).

Depending on the disc, a menu may appear on the TV screen. For DVD VIDEOs, see page 38. For VIDEO CDs, see page 41.

(audio)

H

1 Turn on your TV.

2 Press [/1.

The player turns on and the power indicator lights up in green.

3 Switch the input selector on your

TV so that the signal from the player appears on the TV screen.

To turn off the player

Press [/1. The player enters standby mode.

zHint

The player will turn off automatically whenever you leave it in stop mode for more than 30 minutes (Auto Power Off function).

Note

Super Audio CD audio signals are not output from the digital jack.

Notes on playing CDs with a DTS sound track (DVP-NS705V only)

•When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the player are

connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be connected to the digital jack of the player.

,continued 33