• CINEMA 1: enhances details in dark

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C 0 1 : 3 2 : 5 5

 

 

 

 

 

 

 

 

 

areas by increasing the black level.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• CINEMA 2: White colours become

 

 

 

 

PICTURE

 

 

 

 

 

 

 

+1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

brighter and black colours become

 

 

 

 

BRIGHTNESS

 

 

 

 

 

 

 

–3

 

 

richer, and the colour contrast is

 

 

 

 

COLOR

 

 

 

 

 

+3

 

 

 

 

 

 

HUE

 

 

 

 

 

 

–1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

increased.

 

 

 

 

RETURN

 

RESET

 

 

 

• MEMORY: adjusts the picture in

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

greater detail.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

zHints

When you watch a movie, “CINEMA 1” or “CINEMA 2” is recommended.

The picture can be adjusted by pressing the PICTURE MODE button on the player as well.

You can also select “CUSTOM PICTURE MODE” from the Control Menu (page 13).

Adjusting the picture items in “MEMORY”

You can adjust each element of the picture individually.

PICTURE: changes the contrast

BRIGHTNESS: changes the overall brightness

COLOR: makes the colour deeper or lighter

HUE: changes the colour balance

1 Press PICTURE MODE repeatedly to select “MEMORY” and press ENTER.

The “PICTURE” adjustment bar appears.

To turn off the display

Press ORETURN , or select “RETURN” in step 3 and press ENTER.

zHints

To reset the picture items to the default values, press c after step 3 to select “RESET” and press

ENTER.

When “PLAYBACK MEMORY” in “CUSTOM SETUP” is set to “ON” the player will save a single setting for up to 40 individual discs. (This does not apply to DVD-RWs in VR mode.)

If you do not want to save the adjustment in step 2, you can go to the next picture item by pressing X/x without saving.

 

 

 

 

 

 

 

 

 

 

 

 

 

PICTURE

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Press C/c to adjust the picture contrast, then press ENTER.

The adjustment is saved, and “BRIGHTNESS” adjustment bar appears.

3 Repeat step 2 to adjust “BRIGHTNESS,” “COLOR,” and “HUE.”

The Custom Picture Mode display appears. You can check each adjustment.

64