• SUBWOOFER

NONE

Select this if you do not connect

 

a subwoofer.

 

 

YES

Select this if you connect a

 

subwoofer to output the LFE

 

(low frequency effect) signals

 

from the subwoofer.

 

 

Notes

The cut off frequency for the subwoofer is fixed at 120 Hz.

If your speakers are too small to reproduce low bass frequencies, utilize a subwoofer for low frequency sound. When you set all speaker settings to “SMALL,” the bass redirection circuitry will be activated and the bass frequencies are output from the subwoofer.

Even if there are fewer than 6 speakers connected, the player distributes the audio signal components to the front speakers.

DISTANCE

Sets the distance from your listening position to the speakers.

Set the distance to your front speakers in “FRONT” first (C). Values in “CENTER” (centre speaker) and “REAR” (rear speaker) will automatically change to the same value (Dand E). Adjust these values to reflect the actual distance to your centre and rear speakers.

(1~15m)(1~15m)

Be sure to change the value in the Setup Display when you move the speakers.

The default adjustments are in parentheses.

FRONT

Set this between 1 and

(3 m)

15 metres in 0.2 metre

 

increments.

CENTER

Set this within –1.6 and +0.6

(3 m)

metres of the “FRONT” setting

 

in 0.2 metre increments. For

 

example, if “FRONT” is set to

 

6 metres, “CENTER” can be set

 

between 4.4 and 6.6 metres.

REAR (3 m) Set this between the “FRONT”

 

setting and –5 metres in 0.2

 

metre increments. For example,

 

if “FRONT” is set to 6 metres,

 

“REAR” can be set between 1

 

and 6 metres.

Notes

If each of the front or rear speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

Do not place the rear speakers farther away from your listening position than the front speakers.

These settings do not affect the Super Audio CD Multi audio signals.

BALANCE

Varies the balance of the left and right speakers. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

FRONT

Set this between –6 dB [L] and

(0 dB)

+6 dB [R] (0.5 dB increments).

REAR

Set this between –6 dB [L] and

(0 dB)

+6 dB [R] (0.5 dB increments).

LEVEL

Varies the level of each speaker. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

FRONT (0 dB) Set this between –6 dB and 0 dB (0.5 dB increments).

CENTER

Set this between –12 dB and

(0 dB)

0 dB (0.5 dB increments).

REAR (0 dB)

Set this between –12 dB and

 

0 dB (0.5 dB increments).

SUBWOOFER Set this between –10 dB and

(0 dB)

+10 dB (0.5 dB increments).

82