Started Getting
TV Hookups
Notes
•Refer to the instructions supplied with the component to be connected.
•Do not connect this player to a video deck. If you view the pictures on your TV after making the connections shown below, a picture noise may appear.
VCR TV
CD/DVDConnect
playerdirectly.
•Depending on the TV or receiver (amplifier), sound distortion may occur because the audio output level is high. In this case, set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup display. For details, see page 51.
•If you cannot view the pictures from a VCR through this player
which is connected to a TV with RGB, set 
to …(Audio/
Video) on your TV. When you select 
(RGB), the TV cannot receive the signal from the VCR.
•If you want to use SmartLink function of a VCR, connect the VCR to a TV with the connector conformed to SmartLink function and connect the CD/DVD player to the TV with another connector.
Setups for the player
Some setups are necessary for the player depending on the TV or other components to be connected.
Use the setup display to change the various settings. For details on using the setup display, see page 43.
•To connect the player to a
In the setup display, set “TV TYPE” in “SCREEN SETUP” to “16:9” (default setting). For details, see page 47.
•To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.” For details, see page 47.
•To connect the player to a TV or VCR via EUROAV connector that conforms to the S video signals or RGB signals
In the setup display, set “EURO AV OUT” in “CUSTOM SETUP” to “S VIDEO” or “RGB.” For details, see page 48.
This player conforms to the PAL color system. When you play a disc recorded in the NTSC color system, the player outputs the video signal or the setup display etc. in the NTSC color system and the picture may not appear on the TV screen. In this case, open the disc tray and remove the disc.
10