Notes

Some discs do not have rear sound. In this case, you cannot get the 3D surround effect.

When you select an item, the sound cuts off for a moment.

When the playing signal does not contain the surround component, the effects may be difficult to hear even if you select “VES A” or ”VES B.”

If you connect the front speakers only, “NORMAL SURROUND” and ”ENHANCED SURROUND” cannot be selected.

The sound does not come from the rear speakers when you set “VES” to “VES A” or “VES B” in the Control Menu display even if you have connected rear speakers.

Set the front speakers to form an equilateral triangle including the listening position, or the effects may be difficult to hear even if you select “VES A” or “VES B.”

In case that the player outputs the signal from DIGITAL OUT (OPTICAL, COAXIAL), the surround effect will be heard only when you set “DOLBY DIGITAL” to “D-PCM,” and “MPEG” to “PCM” in “AUDIO SETUP.”

When you play sound tracks with 96 kHz sampling frequency, be sure to select “OFF,” or the output signals will be converted to 48 kHz (sampling frequency). (Except when the player outputs the audio signal from DIGITAL OUT (OPTICAL, COAXIAL).)

When you connect a center speaker and a subwoofer, you can also hear the sound from center speaker and a subwoofer. When you select “VES A” or “VES B,” the player does not output the sound from the center speaker.

When you select “VES A” or “VES B,” set the surround settings of the connected units such as the amplifier to “OFF.”

zYou can select the item of “VES” using the VES button

Press VES on the player. Each time you press the button, the item changes in sequence.

Menu Control the with Functions Various Using

35