Started Getting
Receiver (Amplifier) Hookups
If you have a digital component such as a receiver (amplifier) with a digital connector, DAT or MD
Connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied).
When you play a DVD, set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DOLBYDIGIT AL” to
pWhen using an optical digital connecting cord
Optical digital connecting cord
(not supplied)
Take off the cap and plug in the optical digital connecting cord.
|
|
|
| Receiver (Amplifier) | ||||
|
|
|
| with a digital | ||||
|
|
|
| connector, MD deck, | ||||
CD/DVD player | DAT deck, etc. | |||||||
DIGITAL OUT | DIGITAL IN | |||||||
|
|
|
| |||||
| OPTICAL COAXIAL |
|
|
|
|
| ||
|
|
|
| OPTICAL | ||||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| PCM/DTS/MPEG |
|
|
|
|
| ||
DOLBY DIGITAL |
|
|
|
|
|
pWhen using a coaxial digital connecting cord
Coaxial digital connecting cord
(not supplied) |
|
| Receiver (Amplifier) |
| with a digital |
| connector, MD deck, |
CD/DVD player | DAT deck, etc. |
DIGITAL OUT | DIGITAL IN |
| |
OPTICAL COAXIAL |
|
| COAXIAL |
PCM/DTS/MPEG |
|
DOLBY DIGITAL |
|
Notes
•Refer to the instructions supplied with the component to be connected.
•You cannot make digital audio recordings of discs recorded in
When you make the connections above, do not set “DOLBY DIGIT AL” to “DOLBY DIGIT AL,” “MPEG” to “MPEG” and “DTS” to “ON.” If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.
If you have an audio component with a
Connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied).
pWhen you play a DVD that is recorded in DTS format
Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DTS” to “ON” in the setup display (page 51).
pWhen you play a DVD that is recorded in Dolby Digital format
Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DOLBY DIGIT AL” to “DOLBY DIGIT AL” in the setup display (page 51).
pWhen you play a DVD that is recorded in MPEG format
Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “MPEG” to “MPEG” in the setup display (page 51).
CD/DVD player
Optical or coaxial digital connecting cord
Audio component
with a built in DTS decoder,
DOLBY DIGITAL decoder or MPEG
decoder
Speakers
Notes
•Refer to the instructions supplied with the component to be connected.
•When you do not connect an audio component with a
•When you do not connect an audio component with a
•When you do not connect an audio component with a built in MPEG decoder, do not set “MPEG” to “MPEG.”
12