Adjustments and Settings
Speaker Set Up
Notes
•When you select an item, the sound cuts off for a moment.
•The cut off frequency for the subwoofer is fixed at 100 Hz.
•Set the subwoofer’s cut off frequency as high as possible.
•Depending on the settings of other speakers, the subwoofer may output excessive sound.
•If your speakers are too small to reproduce low bass frequencies, please set all speaker settings to “SMALL” and utilize a subwoofer for low frequency sound.
pDISTANCE
You can vary the distance of each speaker as follows. Default adjustments are in the parentheses.
•FRONT (3.6m)
Front speaker distance can be set in 0.2 meter steps from 1 to 15 meters.
•CENTER (3.6m)
Center speaker distance can be set in 0.2 meter steps from a distance 0.6 meter farther to the front speaker to a distance 1.6 meter closer to your listening position.
•REAR (3.0m)
Rear speaker distance can be set in 0.2 meter steps from a distance equal to the front speaker distance to a distance 5 meters closer to your listening position.
Notes
•When you set the distance, the sound cuts off for a moment.
•If each of the front or rear speakers are not placed an equal distance from your listening position, set the distance of the closest speaker.
•Do not place the rear speaker farther away from your listening position than the front speakers.
pBALANCE
You can vary the balance of each speaker as follows. Default adjustments are in the parentheses.
•FRONT (0dB)
Adjust the balance between the front left and right speakers
•REAR (0dB)
Adjust the balance between the rear left and right speakers
Note
When you select “VES A” or ”VES B” in “VES” in the Control Menu display, you cannot adjust the level or the balance of the speakers except for the front speakers.
pLEVEL
You can vary the level of each speaker as follows. Default adjustments are in the parentheses.
•CENTER (0dB)
Adjust the level of the center speaker
•REAR (0dB)
Adjust the level of the rear speakers
•SUBWOOFER (0dB)
Adjust the level of the subwoofer
pTEST TONE
You can hear the test tone from each speaker in sequence.
•OFF: The test tone is not emitted from speakers.
•ON: During adjustment of “BALANCE” or “LEVEL,” the test tone is emitted from both speakers simultaneously.
Note
While you are playing a disc, you cannot hear the test tone. Execute the test tone after you stop playback.
To adjust the volume of all the speakers at one time
Use the receiver’s (amplifier’s) volume control.
To return to the default setting
Select the item, then press CLEAR.
Adjusting the speaker volume
1While you stop playback, select “SPEAKER SETUP” after pressing SET UP.
2Select “TEST TONE” and set “TEST TONE” to “ON.”
You will hear the test tone from each speaker in sequence.
3From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” and “LEVEL” using >/..
During this adjustment, the test tone is emitted from both speakers simultaneously.
4Select “TEST TONE” and set “TEST TONE” to “OFF” to turn off the test tone.
54