Sony DVP-S560D Receiver (Amplifier) Hookups

Started Getting

Receiver (Amplifier) Hookups

Connect your receiver (amplifier) as follows. Refer as well to the instructions supplied with the component to be connected.

zYou can enjoy surround sounds even if you connect front speakers only

You can use 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (VES: Virtual Enhanced Surround and VIRTUAL SEMI MULTI DIMENSION). For details, see page 34.

When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise.

If you have a digital component such as a receiver (amplifier) with a digital connector, DAT or MD, connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied).

Optical digital connecting cord (not supplied) (1)

Required cords

Audio connecting cord (not supplied) (1)

White (L)	White (L)
Red (R)	Red (R)

S video cord (supplied) (1)

CD/DVD player

Coaxial digital connecting cord (not supplied) (1)

Do not connect the power cord to a switched AC outlet such as the AC outlet on a receiver (amplifier). Doing so may cause the Playback Memory and menu settings to be cancelled when you turn off the receiver.

5.1CH OUTPUT	AUDIO OUT		DIGITAL OUT	VIDEO OUT	S VIDEO OUT
FRONT REAR CENTER	R	L	PCM/DTS/
L		1	DOLBY DIGITAL
			COAXIAL OPTICAL	1	1	COMPONENT VIDEO OUT
				2
R		2				Y PB/B-Y PR/R-Y

				To an AC outlet
To AUDIO	To DIGITAL	To S VIDEO
OUT (R, L)	OUT	OUT
	(OPTICAL)	To S VIDEO
	Take off the			TV
	cap.	input
			INPUT
	To			S VIDEO
	DIGITAL
			L
	OUT
			AUDIO
	(COAXIAL)
			R
		To optical digital input	DIGITAL IN	Receiver
				(Amplifier) with
			OPTICAL	a digital
	or			connector, MD
				deck, DAT deck,
	or		COAXIAL	etc.
		To coaxial digital input
			CD	Receiver
			L	(Amplifier)

	R
: Signal flow	To audio input

10