Note
You cannot enjoy a picture with an S video signal if your TV does not conform to the S video signal. When your TV does not have an S VIDEO input, connect the component via the VIDEO INPUT connector using the supplied audio/video connecting cord instead of the S video cord. For details, see page 8.
Refer to the instructions supplied with your TV.
Setups for the player when using the
digital connecting cords
Connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied). You do not need to use the audio connecting cord.
Some setup adjustments are necessary for the player depending on the components to be connected.
Use the setup display to change the various settings. For details on using the setup display, see page 46.
If your receiver (amplifier) does not have a builtin Dolby* Digital decoder or DTS decoder
•To listen to the sound through speakers connected to a receiver (amplifier) which has a digital connector, or to output the sound to a digital component such as a DAT or MD deck
Set the “AUDIO SETUP” items in the setup display (page 54) as shown in the illustration below. These are the default settings.
AUDIO SETUP |
|
|
| |
| AUDIO ATT: |
| OFF |
|
| AUDIO DRC: |
| STANDARD |
|
| CENTER SPEAKER EQ: | FLAT |
| |
| DOWNMIX: | DOLBY SURROUND |
| |
| DIGITAL OUT: |
| ON | Set the |
| DOLBY DIGITAL: |
| ||
|
| items as | ||
| DTS: |
| OFF | |
|
| shown | ||
| 48kHz/96kHz PCM: | 48kHz/16bit | ||
|
| |||
To set, press 
, then ENTER .
To quit, press DISPLAY .
If you have an audio component with a
•When you connect an audio component with a built- in Dolby Digital decoder A
Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in the setup display (page 55).
•When you connect an audio component with a built- in DTS decoder B
Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DTS” to “ON” in the setup display (page 55).
AUDIO SETUP |
|
|
| |
| AUDIO ATT: |
| OFF |
|
| AUDIO DRC: |
| STANDARD |
|
| CENTER SPEAKER EQ: | FLAT |
| |
| DOWNMIX: | DOLBY SURROUND |
| |
| DIGITAL OUT: |
| ON | A |
| DOLBY DIGITAL: | DOLBY DIGITAL | ||
| DTS: |
| ON |
|
| 48kHz/96kHz PCM: | 48kHz/16bit | B | |
|
|
|
| |
To set, press 
, then ENTER .
To quit, press DISPLAY .
Notes
•When you do not connect an audio component with a
•When you do not connect an audio component with a
•When you connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector, the Virtual 3D Surround effect cannot be heard.
Started Getting
When you have made the connections using an optical or coaxial digital connecting cord, do not set ”DOLBY DIGITAL“ to ”DOLBY DIGITAL,“ ”DTS“ to ”ON“ and “48kHz/ 96kHz PCM” to “96kHz/24bit.” If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.
Note
You cannot make direct digital audio recordings of discs recorded in multichannel surround format using an MD deck or DAT deck.
*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic” and the
Confidential unpublished works.
11