If you connect the player to a monitor or projector having component video input connectors that conform to output signals from the COMPONENT VIDEO OUT (Y, PB/B-Y, PR/R-Y) connectors on the player

Connect the component via the COMPONENT VIDEO OUT connectors using three video connecting cords (not supplied) of the same kind. You will get a better picture.

 

Monitor or projector

CD/DVD player

with component video

input connectors

 

COMPONENT VIDEO OUT

COMPONENT

 

 

VIDEO IN

 

PR

Y PB/B-Y PR/R-Y

 

 

PB

 

Y

Notes

Refer to the instructions supplied with the component to be connected.

Do not connect this player to a video deck. If you do, noise may appear in the picture.

VCR TV

CD/DVD

Connect

directly

player

 

Depending on the TV or receiver (amplifier), sound distortion may occur because the audio output level is high. In this case, set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup display. For details, see page 54.

Setups for the player

Some setup adjustments are necessary for the player depending on the TV or other components to be connected.

Use the setup display to change the various settings. For details on using the setup display, see page 46.

To connect the player to a normal TV

In the setup display, set “TV TYPE” in “SCREEN SETUP” to “4:3 LETTER BOX” (default setting) or “4:3 PAN SCAN.” For details, see page 50.

To connect the player to a TV having the WIDE MODE function

In the setup display, set “TV TYPE” in “SCREEN SETUP” to “16:9/4:3 WIDE MODE.” For details, see page 50.

To connect the player to a wide-screen TV

In the setup display, set “TV TYPE” in “SCREEN SETUP” to “16:9/4:3 WIDE MODE.” For details, see page 50.

Started Getting

9