Getting Started
Unpacking
Check that you have the following items:
•Audio connecting cord (1)
•Video connecting cord (1)
•S video cable (1)
•Remote commander (remote)
•Sony
Inserting batteries into the remote
You can control the player using the supplied remote. Insert two R6 (size AA) batteries by matching the + and
–on the batteries. When using the remote, point it at the remote sensor g on the player.
Hooking Up the System
Overview
This section describes how to hook up the CD/DVD player to a TV (with audio/video input jacks) and/or an amplifier. You cannot connect this player to a TV without a video input connector. Be sure to turn off the power of each component before making the connections.
pTo listen to the sound through TV speakers
CD/DVD player
zYou can control Sony TVs with the g mark using the supplied remote
See page 39.
zWhen to replace batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones.
Notes
•Do not leave the remote in an extremely hot or humid place.
•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
•If you will not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
To AUDIO | To VIDEO | To an AC outlet |
OUT | OUT | TV |
To video |
input |
To audio
: Signal flow input
To an AC outlet
pTo listen to the sound through speakers connected to an amplifier
CD/DVD player
To | To |
| To an AC |
AUDIO | VIDEO | TV | outlet |
OUT | OUT |
|
|
|
| To video input |
|
| To audio |
|
|
Amplifier | input |
| To an AC outlet |
|
|
|
: Signal flow | To an AC outlet |
6EN