Sony EBS-SP35 - page 4

Sony Displays with DVI-HDCP Digital Connections

PPV Provider

Control Box

1. Connect HDMI cable to EBS-SP35

2. Connect HDMI to DVI adapter to Display Input 1

3. Connect HDMI cable to HDMI to DVI adapter

4. Connect L/R audio to SP35

5. Connect mini-jack audio to the Input 1 audio

6. Connect the Communication cable to the input

marked Display on the SP35

7. Connect the 9-pin serial connector on the

Communication cable to the input labeled Remote

on display.

8. Plug mini-jack cable to Control-S Out

9, Connect Coax cable to RF IN on SP35

10. Connect PPV provider RJ12 to PPV input on SP35

11. Plug in 12V DC power adapter

Power Supply

Note: Sony FWD-42PX2 and FWD-42PV1 have connections located on the bottom of the display and in different

configuration than shown above.

Initial Power On

When the power is applied to the EBS-SP35 with the external AC adapter, the device will power

on. The power status of the EBS-SP35 can be confirmed by viewing a lighted Green LED through

the top cover of the set-top-box.. If this light is not seen, check the connections of the power

supply.

Menus / Configuration

Stand Alone vs. Lodging Mode

The EBS-SP35 is designed to operate in a Pay-Per-View environment, connected to a lodging

system that uses protocols and commands to control the display and tuner. The EBS-SP35 may

also be able to operate in a Stand Alone mode to provide basic TV tuning for the Sony Display.

When the EBS-SP35 is connected to a compatible lodging system, the SP35 will automatically

recognize the lodging system and respond to the PPV commander. In Lodging Mode, the control

buttons and IR commands from the Sony remote will not control the

Supported Remote Controls

The EBS-SP35 is designed to function with the remote control that shipped with the Sony display.

Because of differences in the display remotes, in which not all remotes have the same available

buttons, some remotes may have limited functionality with the display remote. In such case, as

standard Sony TV remote or universal remote using Sony IR commands can control the EBS-

SP35 in Stand-Alone Mode.