User’s Manual
3.5.2.4 CPU L1 & L2 CacheThis item allows you to enable the CPU L1 & L2 cache to speed up memory access. However, it depends on CPU design.
| Item |
|
| Description |
|
|
|
|
| ||
| Enabled |
|
| Enable cache |
|
| Disabled |
| Disable cache |
This item allows you to enable the CPU L3 cache to speed up memory access.
Item | Description |
Enabled | Enable cache |
Disabled | Disable cache |
This item allows you to enable the CPU external L2 cache use ECC checking method in memory access.
Item | Description |
Enabled | Enable ECC checking |
Disabled | Disable ECC checking |
This category speeds up Power On Self Test (POST) after you power up the computer. If it is set to Enable, BIOS will shorten or skip some check items during POST.
Item | Description |
Enabled | Enable quick POST |
Disabled | Normal POST |
The BIOS attempts to load the operating system from the devices in the sequence selected in these items.
Item | Description |
Floppy | Floppy Device |
LS120 | LS120 Device |
Hard Disk | Hard Disk Device |
CDROM | CDROM Device |
ZIP100 | |
USB Floppy Device | |
USB ZIP Device | |
USB CDROM Device | |
LAN | Network Device |
Disabled | Disabled any boot device |
This item allows you to enable the system to boot from other device.
| Item |
|
| Description |
|
|
|
|
| ||
| Enabled | Enable booting from other device | |||
| Disabled | Disable booting from other device |
Item | Description |
|
Off | Enable NumLock |
|
On | Disable NumLock |
|
|