14
SATELLITE SETUP SCREEN
The great thing about your satellite system is that you can switch from one satellite to another at will to take advantage
of different programming on different satellites. Note: some receivers may not load their Guide properly on
alternate satellites. This is a receiver issue; contact your receiver manufacture for assistance.
This screen is a where you add and remove satellites to the positioner. You may also change the satellite that you want
the system to search for when you select the Find Satellite Option on the Main Menu. All satellites in orbit are given
a Longitude number. Numbers like 91, 101, 110, 119, are all satellite locations. On the above screen are listed 4
satellites with one open slot left to add another satellite. The maximum number of satellites you can have programmed
is 5.
To ADD a satellite, simply highlight “Add Satellite” and press “Select” on the remote. You then will simply enter a
longitude address on that screen, and that’s it!
To change the satellite options, highlight the satellite you want to change press Select or OK. You may not change the
satellite that is considered the default if you try to select that one nothing will happen. When you select a satellite to
change its options another screen will come up, press the Select or OK button to make it the default, press the 5 button
to delete it.
Power Control Cable Out to TV Antenna In Video Data Interface Satellite In
+ - or Out (LNB)
Ignition Dry-Camping connection
Stow