For Your InformationPrecautionsOn safety

Operate the printer on 110 to 120 V AC (for the FVP- 1) or 220 to 240 V AC (for the FVP-1E), 50/60 Hz only.

Be careful not to set or drop any heavy objects on the power cord, or to damage the power cord in any way. Never operate this printer with a damaged power cord.

Should any solid object or liquid fall into the cabinet, unplug the printer and have it checked by qualified personnel before operating it any further.

Never disassemble the printer.

To disconnect the power cord, pull it out by the plug. Never pull the power cord itself.

When the printer is not going to be used for an extended period of time, disconnect the power cord from the wall outlet.

Do not handle the printer roughly.

To reduce the risk of electrical shock, always unplug the printer from electrical outlet before cleaning and servicing the printer.

On installation

Avoid placing the unit in a location subject to:

vibration

high humidity

excessive dust

direct sunlight

extremely high or low temperatures

Do not use electrical equipment near the unit. The unit will not work properly in electromagnetic fields.

The unit is designed to operate horizontally. Never attempt to operate the printer in a tilted position. If the unit was placed on its side or with its top panel facing down, make sure to remove the paper tray and check that the print papers are set properly before starting operation.

38GB For Your Information