11 (GB)
Location and Function of Parts and Controls
Remote Commander RM-9801 POWER ON switch
Press to power on the display.
2 STANDBY button
Press to change the display to the standby mode.
3 MUTING button
Press to mute the sound. Press again to restore sound.
4 DISPLAY button
Press to display information about the input signal
type and picture mode on the screen. Press the button
again to hide it. Even without pressing the button, the
information will disappear automatically after a while.
5 INPUT1 button
Press to select the signal input to the INPUT1
connectors.
6 INPUT2 button
Press to select the signal input to the INPUT2
connectors. Each press of the button toggles between
RGB and COMPONENT. When the “Fix” input
setting has been selected, the selection is fixed to
RGB or COMPONENT.
For details, see “Input Setting” on page 19 (GB).
RGB/COMPONENT ACTIVE THROUGH
Adaptor BKM-FW12
1 RGB/COMPONENT IN (D-sub 15-pin) :
Connects to the component signal output or analog
RGB signal output of a piece of video equipment or a
computer.
For details on inputting a component signal to the
connector, see “Pin assignment” on page 49 (GB).
2 RGB/COMPONENT OUT (D-sub 15-pin) :
Connects to the component signal input or analog
RGB signal input of a piece of video equipment or a
computer.
3 AUDIO IN (Stereo minijack) :
Inputs audio signal. Connects to the audio signal
output of a piece of video equipment or a computer.
Note
When the unit is not connected to an AC power or is
in the standby mode, no signal is output from the
RGB/COMPONENT OUT.
Other optional adaptors of the BKM-FW series are to
be connected to analog RGB signal outputs. For
details, see the documentation of the respective
adaptor.
AUDIO
IN OUT IN
RGB/COMPONENT THROUGH
1
2
3
RM-
980
M
O
NIT
OR
M
U
TIN
G
DI
S
PLAY
S
TBY
O
N
ENTER
S
E
T
ON
0
8
7
9
5
4
6
213
2
1
3
qa
5
4
7
6
8
9
0
qs
qd
qf
qg
qk
qh
ql
qj