Sony FWD-50PX2, FWD-50PX2A Optional adaptors (Not supplied)

10 (GB)

Location and Function of Parts and Controls

Optional adaptors (Not supplied)

The connectors marked with 7 and 8 on the

connector panel are slot-in type and can be fitted with

any of the optional adaptors described below.

For details on installation, consult your Sony dealers.

Video/S-Video Input/Output Adaptor BKM-

FW10

Same as pre-installed 6.

COMPONENT/RGB Input Adaptor BKM-FW11

1Y/G PB/CB/B PR/CR/R IN (BNC) : Connects to the

analog RGB signal or component (YUV) signal

output of a piece of video equipment or a

computer.

2HD VD IN (BNC) : Connects to the

synchronization signal output of a computer.

3AUDIO (Stereo minijack) : Inputs an audio

signal. Connects to the audio output of a piece of

video equipment or a computer.

7 OPTION1 (VIDEO/COM) slot

This slot supports video signals and the

communication function. The slot accepts optional

adaptors for video signal input/output (such as BKM-

FW10, BKM-FW11, BKM-FW12) as well as optional

adaptors with network management capability (such

as BKM-FW32, BKM-FW50). These adaptors allow

you to control the display unit via the network.

8 OPTION2 (VIDEO) slot

This slot supports video signals. A blank panel is

attached to this slot when shipped from the factory.

The slot accepts optional adaptors for video signal

input/output. For optional adaptors with network

management capability, use the OPTION1 slot 7.

AUDIO VD HD P

R

/C

R

/R P

B

/C

B

/B Y/G

COMPONENT/RGB INPUT ADAPTOR

1

2

3

Contents

Main FWD-50PX2/50PX2A Flat Panel Display WARNING Owners Record For customers in the U.S.A. For customers in Canada CAUTION Table of Contents Page Precautions Page Location and Function of Parts and Controls Front / Rear / Left side Indicator Section Control Button Section (Top) Connector Panel Optional adaptors (Not supplied) Remote Commander RM-980 Installing batteries When mounting the display horizontally When mounting the display vertically Caution Provide an ample amount of space around the display When using the stand (not supplied) Connections Connecting the Speakers Connecting the AC Power Cord 1 2 Cable management Using the cable holders Using On-screen Menus Operating Through Menus Menu operating buttons Configuration of the menu 2 SCREEN CONTROL menu Multi Display Setup Wide Setup Aspect Adjust Screen CUSTOM SETUP menu Power Saving Speaker Out Closed Caption Display INITIAL SETUP/INFORMATION Language Color System Auto Shut Off Auto Screen Adjust Information IP Address Setup Speed Setup TIMER/CLOCK menu Clock Set Clock Display On/Off Timer SCREEN SAVER menu Watching the Picture Switching the Input Signal Input Signal, Picture Mode and Display Status Information 3 4 Actual on-screen display of the units status Selecting Image Quality 3 4 5 Adjusting the Picture 1 2 1 2 1 Color Temp. Phase Sharpness Noise Reduct. 2 Restoring the Adjust Picture Menu Items to Their Original Settings 1 2 Picture Enlargement Setting Auto Wide 3 4 5 6 7 8 Resizing and Positioning the Picture Adjusting the Size, Position, or the Pixels of the Picture 1 Adjust screen 2 1 H Size 2 H Shift V Size Viewing two pictures at the same time 2 1 5 4 2 1 2 1 Adjusting the position of the inset picture (For PinP only) Setting up the Multi Display 2 3 4 5 Adjusting the Sound Quality Adjusting the Treble, Bass, and Balance, etc. Treble Bass Balance Selecting the On-screen Language 2 5 4 3 Controlling Power On/Off Automatically (Timer Function) Adjusting the time and the day 2 6 5 5 7 6 2 3 SCREEN SAVER Function 3 4 Reversing the Color Tones of the Image 2 1 2 3 4 5 2 Adjusting the brightness of background of picture 2 Lowering the brightness level gradually Setting an IP address and communication speed Obtaining an IP address automatically (DHCP) 2 3 4 Self-diagnosis Function 1 2 Operating a Specific Display With the Remote Commander 1 2 3 4 Troubleshooting Page Page Specifications Video processing Inputs and Outputs VIDEO/S VIDEO input/output adaptor BKM-FW10 General Pin assignment